View source for Manually Connect to Wired Network

== Manually Connect to Wired Network ==

It may be necessary to use these instructions if your browser or computer do not allow you to execute the '''Cisco Network Setup Assistant'''.

<p>&nbsp;</p>
<ol>
<li>Click on '''Start > Run''' and type in '''services.msc''' and press enter
<div class="toccolours mw-collapsible mw-collapsed" style="width:450px">
[[Image:ENS-ISE-Servicesmsc.png|center|450px]]
</div>

<li>Right click on '''Wired AutoConfig''' and left click on '''Properties'''.  

<div class="toccolours mw-collapsible mw-collapsed" style="width:750px">
[[Image:ENS-ISE-Services-wiredautoconfig.png|center|750px]]
</div>

<li>Make the following changes:
   <ol>
       <li>Change '''Startup type''' to '''Automatic'''.
       <li>Click '''Start''' to start the service
       <li>Click '''OK''' to save changes
   </ol>

<div class="toccolours mw-collapsible mw-collapsed" style="width:350px">
[[Image:ENS-ISE-Services-wiredautoconfig-settings.png|center|350px]]
</div>

<li>Access your Network Interfaces via Control Panel. ('''Start > Control Panel > Network and Sharing Center > Change adapter settings''')
<li>Right Click on your Local Area Connection (Ethernet), left click on properties.
<div class="toccolours mw-collapsible mw-collapsed" style="width:300px">
[[Image:ENS-ISE-Control panel LocalAreaConnection.png|center|300px]]
</div>

<li>Left Click on '''Authentication''' Tab
<div class="toccolours mw-collapsible mw-collapsed" style="width:350px">
[[Image:ENS-ISE-LocalAreaConnection Main.png|center|350px]]
</div>

<li>Make Sure that the following items are checked
   <ol>
      <li>'''Enable IEEE 802.1x authentication'''
      <li>'''Remember my Credentials for this connection each time I'm logged in'''
      <li>'''Fallback to unauthorized network access'''
   </ol>
<div class="toccolours mw-collapsible mw-collapsed" style="width:400px">
[[Image:ENS-ISE-LocalAreaConnection-Authentication1.png|center|400px]]
</div>
<li>Make sure that '''Authentication Method''' is '''Microsoft: Protected Eap (PEAP)'''

<li>Left Click on '''Additional Settings''' and make the following configuration changes:
   <ol>
      <li>Check '''Specify Authentication Mode'''
      <li>Select '''User Authentication'''
      <li>Left Click '''OK''' to save settings and return to the '''Authentication''' Tab of '''Local Area Connection''' Properties
   </ol>
<div class="toccolours mw-collapsible mw-collapsed" style="width:350px">
[[Image:ENS-ISE-LocalAreaConnection-Authentication3.png|center|350px]]
</div>

<li>Left Click on '''Settings''' and make the following changes:
   <ol>
      <li>Check '''Validate Server Credentials'''
      <li>Check '''Connect to these servers:'''
      <li>Enter in the following servers, exactly as specified:
      <pre>ch-ise-psn1.wpunj.edu;ch-ise-psn2.wpunj.edu;vr-ise-psn1.wpunj.edu;vr-ise-psn2.wpunj.edu</pre>
      <li>Check Any '''GeoTrust''' Certificates
      <li>Check '''Do Not prompt user to authorize new servers or trusted certification authorities'''
      <li>Change '''Select Authentication Method''' to '''Secured password (EAP-MSCHAP v2)'''
      <li>Click '''Configure''' and uncheck '''Automatically use my Windows logon name and password (and domain if any)''' and click '''OK'''.
<div class="toccolours mw-collapsible mw-collapsed" style="width:250px">
[[Image:ENS-ISE-EAP MSCHAPv2.PNG|center|250px]]
</div>

   </ol>
<div class="toccolours mw-collapsible mw-collapsed" style="width:450px">
[[Image:ENS-ISE-LocalAreaConnection-Peap.PNG|center|450px]]
</div>
<li>Click OK on all open dialog boxes in order to save settings and apply.
<li>You should now be prompted via Windows to enter your a Username / Password.  Please Enter your WP Connect Username and Password.
</ol>


You should now have full access to the WPUNJNet.


[[:Category:Network Services|Network Services]]